Medium Duty Slider and Roller Bed Belt Conveyors
Omni MetalCraft Corp. model BCST-300 welded conveyor will provide you a rigid frame construction for those heavier products in your assembly, sorting or other unit handling applications.
SLIDER BED / ROLLERBED BELT CONVEYOR (BCST)
- Welded Constuction
- 5 1/2 in. formed 10 ga. channel frame
- Belt Widths up to 48 in.
- Drive packages available from 1/3 HP to 2 HP
- Roller Bed: 1.9 in. dia. rollers with 7/16 in. hex shafts spaced on 6 in. centers.
Black Trackmate 120 EMB with clipper lace
6 in. to 48 in. in full one inch increments.
10 ga. slider bed pans welded in 5 1/2 in. deep x 10 ga. painted steel channel frames. Standard 5 FT. and 10 ft. long welded sections, with welded-in end couplers.
3 in. structural channel legs with 4 in. of adjustment. Available up to 89 in. top of belt. One support at every bed joint and at the ends of conveyor
4 in. dia. with 1 3/16 in. dia. shaft or 8 in. dia. with 1 7/16 in. dia. shaft or 1 11/16 in. dia. shaft, crowned and fully lagged.
4 in. dia. with 1 3/16 in.dia. shaft, 6 in. dia. with 1 7/16 in. dia. shaft, crowned.
2 1/2 in. dia. with grease packed ball bearings (Adjustable)
1.9 in. dia. with grease packed bearings.
Provides belt take-up at tail pulley to allow for future belt stretch.
Sealed,pre-lubricated,self-aligning ball bearings on drive and tail pulleys.
Constant 60 FPM
Sealed worm gear "C" face flanged speed reducer.
1/2 HP - 230/460V - 3 phase - 60Hz -totally enclosed,fan cooled.
Available as option.
Maximum load per linear foot with legs on 10 ft. centers = 300 lbs.